China Military Ballistic Plate PE Combat Ceramic Plate Tactical Gear manufacturer

Item Description

Navy Ballistic Plate PE Overcome Ceramic Plate Tactical Equipment

Requirements:

WEIGHTS: two.1 – 4.5 lbs.
Tests STHangZhouRD: NIJ 5711.04
Safety Level: Degree III & Specific Threats
CONFIGURATION: In-Conjunction with NIJ Degree II or earlier mentioned
PLATE THICKNESS: .sixty two in. / 15.seventy five mm
BUOYANCY: N/A
CURVATURE: Multi Curve
Materials: Ceramic CZPT HAP
THREATS:
five.45 x 39-mm, 53-grain MSC 7N6
five.56 x forty five-mm, 62-grain M855 Ball, SS109
7.sixty two x 39-mm, 123-grain MSC
seven.sixty two x 51-mm, 149-grain M80 FMJ
7.62 x 54R-mm, 148-grain LPS

 

 

Requirements FOR Widespread Designs(10*12”, SAPI Lower)

 

Model No.

 

Menace Stage

 

Ballistic Content

 

Excess weight

LY-P3A

 

NIJ Level IIIA

UHMWPE

.45kg±0.05

LY-K3A

ARAMID

.5kg±0.05

LY-Y3D

 

 

NIJ Level III, Stand Alone(SA.)

Ceramic & UHMWPE

two.1kg±0.05

LY-T3D

Ceramic & UHMWPE

1.8kg±0.05

LY-P3D

UHMWPE

one.55kg±0.05

LY-Y3X

 

 

NIJ Level III, In Conjunction(ICW.) 

Ceramic & UHMWPE

1.7kg±0.05

LY-T3X

Ceramic & UHMWPE

1.5kg±0.05

LY-P3X

UHMWPE

one.0kg±0.05

LY-Y3PD

 

NIJ Level III+, Stand By yourself(SA.)

Ceramic & UHMWPE

two.55kg±0.05

LY-T3PD

Ceramic & UHMWPE

2.2kg±0.05

LY-Y3PX

 

NIJ Level III+, In Conjunction(ICW.)

Ceramic & UHMWPE

1.95kg±0.05

LY-T3PD

Ceramic & UHMWPE

1.7kg±0.05

LY-Y4D

 

NIJ Level IV, Stand By itself(SA.)

Ceramic & UHMWPE

2.85kg±0.05

LY-T4D

Ceramic & UHMWPE

2.3kg±0.05

LY-Y4X

 

NIJ Level IV, In Conjunction(ICW.) 

Ceramic & UHMWPE

two.65kg±0.05

LY-T4X

Ceramic & UHMWPE

2.1kg±0.05

LY-Y4PD

 

NIJ Level IV+, Stand By yourself(SA.)

Ceramic & UHMWPE

three.2kg±0.05

LY-T4PD

Ceramic & UHMWPE

two.8kg±0.05

LY-Y4PX

 

NIJ Level IV+, In Conjunction(ICW.) 

Ceramic & UHMWPE

2.85kg±0.05

LY-T4PX

Ceramic & UHMWPE

two.5kg±0.05

FAQ
Q1: Can we get the sample for reference?
A1: We are happy to send out samples for your inspection, but you need to spend the
sample(is dependent on product’s price) and the convey costs.

Q2: How prolonged will be my products completely ready for cargo ?
A2: Diverse specification goods with distinct amount ordered, the time of supply is diverse. As normal, it will get
15-twenty five function times.

Q3: How can we assure quality?
A3: Always a pre-production sample prior to mass production and often a closing inspection before
cargo.

Q4: What is your conditions of payment?
A4: T/T, L/C, PayPal, and can be negotiated.

Q5: How to remedy the top quality difficulties following income?
A5: (1) Get photos of the troubles and send to us.
(2) Get movies of the problems and send out to us.
(3) Ship again the defective goods to us if essential. After we verified the difficulties, will give you the solution in 7 times.

Q6: Can we make our emblem on the items?
A6: Of course. We can do logo as your prerequisite as effectively as your design task. And we also settle for custom made provider.

Any Question You should Deliver Inquiry
Jinagsu Linry Proven considering that 2012, more than 10 years’ encounter in military provides . We have ISO 9001 Certificate, SGS examination
report, High quality Administration Program Certification, and the item unique take a look at report.
OEM support is welcomed, a lot more information, remember to constantly feel cost-free to make contact with us, we will reply before long.

 

US $40
/ Piece
|
1 Piece

(Min. Order)

###

Transport Package: Bubble Film
Specification: 32*28*20cm
Trademark: Lingry
Origin: China

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS FOR COMMON MODELS(10*12”, SAPI CUT)
 
Model No.
 
Threat Level
 
Ballistic Material
 
Weight
LY-P3A
 
NIJ Level IIIA
UHMWPE
0.45kg±0.05
LY-K3A
ARAMID
0.5kg±0.05
LY-Y3D
 
 
NIJ Level III, Stand Alone(SA.)
Ceramic & UHMWPE
2.1kg±0.05
LY-T3D
Ceramic & UHMWPE
1.8kg±0.05
LY-P3D
UHMWPE
1.55kg±0.05
LY-Y3X
 
 
NIJ Level III, In Conjunction(ICW.) 
Ceramic & UHMWPE
1.7kg±0.05
LY-T3X
Ceramic & UHMWPE
1.5kg±0.05
LY-P3X
UHMWPE
1.0kg±0.05
LY-Y3PD
 
NIJ Level III+, Stand Alone(SA.)
Ceramic & UHMWPE
2.55kg±0.05
LY-T3PD
Ceramic & UHMWPE
2.2kg±0.05
LY-Y3PX
 
NIJ Level III+, In Conjunction(ICW.)
Ceramic & UHMWPE
1.95kg±0.05
LY-T3PD
Ceramic & UHMWPE
1.7kg±0.05
LY-Y4D
 
NIJ Level IV, Stand Alone(SA.)
Ceramic & UHMWPE
2.85kg±0.05
LY-T4D
Ceramic & UHMWPE
2.3kg±0.05
LY-Y4X
 
NIJ Level IV, In Conjunction(ICW.) 
Ceramic & UHMWPE
2.65kg±0.05
LY-T4X
Ceramic & UHMWPE
2.1kg±0.05
LY-Y4PD
 
NIJ Level IV+, Stand Alone(SA.)
Ceramic & UHMWPE
3.2kg±0.05
LY-T4PD
Ceramic & UHMWPE
2.8kg±0.05
LY-Y4PX
 
NIJ Level IV+, In Conjunction(ICW.) 
Ceramic & UHMWPE
2.85kg±0.05
LY-T4PX
Ceramic & UHMWPE
2.5kg±0.05
US $40
/ Piece
|
1 Piece

(Min. Order)

###

Transport Package: Bubble Film
Specification: 32*28*20cm
Trademark: Lingry
Origin: China

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS FOR COMMON MODELS(10*12”, SAPI CUT)
 
Model No.
 
Threat Level
 
Ballistic Material
 
Weight
LY-P3A
 
NIJ Level IIIA
UHMWPE
0.45kg±0.05
LY-K3A
ARAMID
0.5kg±0.05
LY-Y3D
 
 
NIJ Level III, Stand Alone(SA.)
Ceramic & UHMWPE
2.1kg±0.05
LY-T3D
Ceramic & UHMWPE
1.8kg±0.05
LY-P3D
UHMWPE
1.55kg±0.05
LY-Y3X
 
 
NIJ Level III, In Conjunction(ICW.) 
Ceramic & UHMWPE
1.7kg±0.05
LY-T3X
Ceramic & UHMWPE
1.5kg±0.05
LY-P3X
UHMWPE
1.0kg±0.05
LY-Y3PD
 
NIJ Level III+, Stand Alone(SA.)
Ceramic & UHMWPE
2.55kg±0.05
LY-T3PD
Ceramic & UHMWPE
2.2kg±0.05
LY-Y3PX
 
NIJ Level III+, In Conjunction(ICW.)
Ceramic & UHMWPE
1.95kg±0.05
LY-T3PD
Ceramic & UHMWPE
1.7kg±0.05
LY-Y4D
 
NIJ Level IV, Stand Alone(SA.)
Ceramic & UHMWPE
2.85kg±0.05
LY-T4D
Ceramic & UHMWPE
2.3kg±0.05
LY-Y4X
 
NIJ Level IV, In Conjunction(ICW.) 
Ceramic & UHMWPE
2.65kg±0.05
LY-T4X
Ceramic & UHMWPE
2.1kg±0.05
LY-Y4PD
 
NIJ Level IV+, Stand Alone(SA.)
Ceramic & UHMWPE
3.2kg±0.05
LY-T4PD
Ceramic & UHMWPE
2.8kg±0.05
LY-Y4PX
 
NIJ Level IV+, In Conjunction(ICW.) 
Ceramic & UHMWPE
2.85kg±0.05
LY-T4PX
Ceramic & UHMWPE
2.5kg±0.05

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Gear

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China Military Ballistic Plate PE Combat Ceramic Plate Tactical Gear     manufacturer China Military Ballistic Plate PE Combat Ceramic Plate Tactical Gear     manufacturer
editor by czh 2023-01-31

Recent Posts